![[Translate to Englisch:] ECCO](/fileadmin/user_upload/AUREX/aurex-ecco-2.jpg)
ECCO
MEASURE EARLIER, CENTER FASTER, SAVE TIME AND MATERIAL IN THE LONG TERM.
The centering aid which is placed early in the process is a necessity for everyone, whose goal is to consequently avoid scrap production and save raw material. ECCO measures the wall thickness already in the vacuum tank and provides for a fast and precise pipe centering by automatic calibration. Especially for thick-walled large pipes this means a key production advantage and the investment pays for itself already after a few production start-ups. The ultrasonic sensors are adjusted to the pipe geometry with pneumatically controlled sensor arms. The recorded values are evaluated by the high-resolution ultrasound electronics and displayed on a 10" display either percentage or in millimetres.
BENEFITS
- Fast setup of the line after the production start
- Optimum pipe centering
- Easy operation
- Significant reduction of start-up scrap
- Regular wall thickness distribution
- System amortized within a few months
- No mechanical sensor conversion required, pneumatic adjustment
- Suitable for PE, PVC and PP
- Exterior diameter larger than 200 mm
- Wall thickness range 5 - 140 mm
ECCO is available with 4 or 8 sensors for the following OD ranges:
Pipe diameter (mm) |
---|
200 - 800 (7.87" - 31.50") |
200 - 1000 (7.87" - 39.37") |
250 - 1200 (9.84" - 47.24") |
630 - 1600 (24.80" - 62.99") |
1000 - 2000 (39.37" - 78.74") |
1600 - 2500 (62.99" - 98.42") |
1800 - 2700 (70.87" - 106.29") |
other ranges available upon request |