
GRAVIMETRIC FEEDER - SAVEOMAT 10
WITH UP TO 5 % MATERIAL SAVINGS PAYBACK IS LESS THAN FOUR WEEKS.
Since the introduction of the basic model in 1987 SAVEOMAT 10 has shaped the plastic extrusion considerably. The proven funnel weigher reduces raw material consumption reliably to an absolute minimum and thus realizes great savings. The formula for success: Easy handling, accurate measuring values for the exact mass throughput and therefore a constant minimal weight per meter over the entire process duration.
The new SAVEOMAT 10
In addition to a 10.1" terminal the new SAVEOMAT 10 also features new software functions. With the Information Management Package its function is expanded to include SPC, remote control and inoTREND.
BENEFITS
- Constant mass throughput rates
- Weight per metre reduced to a minimum
- Raw material savings of up to 5 %
- Stable and reproducible processes
- Reduced start-up scrap
- Optimized funnel geometry for an optimum flow behaviour
- Weigher hopper can be easily unhinged
- Transparent weigher outlet for visual control of the flow
- Filling without dead zones
- Overload protection for load cells
- Integrated cable routing
- Easy operation via a 10.1" touch screen terminal
- Measure/Control/Evaluate: Weight per metre by haul-off unit/extruder/dosing screw, wall thickening function, coil change recognition, ramping
- inoTREND (trend recording function)
- SPC interface
- Remote control function
Type | Mass throughput (kg/h) | Height granules (mm) | Storage hopper Capacity l / Height mm |
---|---|---|---|
TW 20 | 0,2 - 20 | 490 | 15 / 375 |
TW 60 | 0,8 - 60 | 580 | 15 / 375 |
TW 200 | 2 - 200 | 635 | 15 / 375 |
TW 350 | 10 - 350 | 760 | 40 / 635 |
TW 500 | 10 - 500 | 845 | 40 / 635 |
TW 750 | 20 - 750 | 980 | 60 / 845 |
TW 1000 | 50 - 1000 | 1115 | 60 / 845 |
TW 1400 | 50 - 1400 | 1330 | 95 / 1215 |
TW 1600 | 100 - 1600 | 1195 | on request |
TW 1800 | 100 - 1800 | 1255 | on request |
TW 2000 | 100 - 2170 | 1315 | on request |