SAVEOMAT IGS C6 | D6 | CD6| MD6: Reliable realisation of complex recipes.
This series was conceived for the recording and control of max. 6 components per extruder. Therefore, it is particularly suitable for the various tasks in the co-extrusion and dosing process.
The following materials can be processed:
- Powder
- Granules
- Recycled materials
- Fillers
- Fibres
- Liquids
- Reactive liquids such as silane and peroxide
The system in short.
Directly on top of the extruder opening respectively the dosing unit opening, up to 6 material components per extruder are precisely dosed into the process, each one through its own dosing unit. Solid and liquid materials can be conveyed simultaneously and continuously. The very high dosing accuracy is due to the construction of the conveying parts. The use of servo-motors with an integrated control electronics and a drive that can be finely tuned, permit the extremely exact speed control of up to 1:350 for the conveyance of solids and up to 1:100 for liquids.
Especially in the extrusion process of composite polymers, polymer alloys and cross-linked polymers, the best possible homogenisation of all components is required. iNOEX is able to offer it on account of the continuous and accurate conveying and the unique mixing technology which includes both static and dynamic mixing.
The operator at the terminal is guided by simple pictographic symbols, good recipe management, trends display, process evaluation, operating data recording etc., which are all standards.
Technical data.
| Type | Control of ... | Performance range funnel weighers [kg/h] | Storage hoppers [l] | Conveying capacity dosing unit [kg/h] |
|---|---|---|---|---|
| SAVEOMAT IGS C6 | max. 1 component each on max. 6 extruders | 0,2-2.000 | 15-200 | |
| SAVEOMAT IGS D6 | max. 6 components on max. 1 extruder |
main component: 2-1.400 side component: 0,2-750 |
15-200 | 0,4-620,2* |
| SAVEOMAT IGS CD6 | max. 6 components on max. 6 extruders | main component: 2-1.400 side component: 0,2-750 |
15-200 | 0,4-620,2* |
*for a bulk density of 0,55 kg/l
The strong points:
- Precise realisation of complex recipes for constant product qualities for the extrusion of pipes, tubes, cables, profiles and film
- Simultaneous dosing of solid, liquid and liquid reactive materials
- The direct processing of reactive liquids such as silane and peroxide offers a real cost alternative compared to processing compounds
- The documentation and evaluation of process data offers some potential for improvements